Description of Welded Wire Mesh   
 

Welded wire mesh is created with two orthogonal wires that are joined jointly at their intersections utilizing a resistance welding procedure to sort a grid. The line wires of the grid are guided via the welder making use of a pattern board. The device drops cross wires into place and fuses them with each other to develop the two distinctive planes that type welded wire mesh.

Line wires (also known as extended wires) are laid out on a sample board to set the panel width spacing. Cross wires are fed into a hopper, and are programmed to be dropped one at a time on to the line wires. Then, the cross wires are resistance welded into spot environment the panel duration spacing. The panel advances after the weld and the method begins in excess of again.

Welded Wire Spacing
Welded wire mesh spacing can be expressed by measuring from the centre of two wires (Center to Heart) or by measuring the opening in between two wires (Clear Opening). We can manufacture regular and custom made welded wire mesh with a sq. mesh spacing assortment from one” to as huge as may be necessary.  Rectangular mesh spacing ranges from 1/2″ x up to as long as may possibly be essential.

Edge Circumstances
 Welded Wire Mesh has two common edge conditions: trimmed and untrimmed.

Depth specification:

Content: minimal carbon metal wire, stainless steel wire
Area dealing : black welded wire mesh,
 electro galvanized prior to welded wire mesh,
 Electro galvanized soon after welded wire mesh
 hot-dipped galvanized just before welded wire mesh
Very hot-dipped galvanized right after welding wire mesh
PVC-coated welded wire mesh
Power coated welded wire mesh
Wire diameter: .45mm to 12.0mm
Hole dimensions: 1/three” to 250mm hole
Gap condition: square hole, rectangular gap
Width: .3M to two.0M
Packing : in roll or in panel

Photos of Welded Wire Mesh:  

Specification of Welded Wire Mesh:
 

Specification Listing of Welded Wire Mesh
Opening		Wire Diameter
In inch	In metric unit(mm)
one/four” x one/4″	six.4mm x 6.4mm	22,23,24
3/eight” x three/eight”	10.6mm x ten.6mm	19,20,21,22
one/two” x one/two”	twelve.7mm x 12.7mm	16,17,eighteen,19,20,21,22,23
five/eight” x five/eight”	16mm x 16mm	eighteen,19,20,21,
3/four” x three/4″	19.1mm x 19.1mm	16,seventeen,eighteen,19,20,21
1″ x one/two”	twenty five.4mm x twelve.7mm	16,17,eighteen,19,20,21
1-1/two” x 1-one/2″	38mm x 38mm	14,15,16,17,eighteen,19
1″ x two”	twenty five.4mm x 50.8mm	14,15,sixteen
two” x two”	50.8mm x fifty.8mm	twelve,13,fourteen,fifteen,16
CZPT Note: one,CZPT roll length: 30mwidth: .5m to 1.8m 2,Specific measurements CZPT at request 3,Packing: in water-resistant paper in rolls. CZPT packing CZPT at request.

Packing and Delivery:

Solutions Supplied:

Free sample companies

We supply samples,with sample expenses,shipping and delivery and taxes compensated by the buyer.

CZPTize solutions
We can produce a lot of sorts of welded mesh products,if you have your own design and style or have specificationdrawing,we can make products as your requirement.
If you never have any notion, make sure you notify us in which will it be using, we will give you some specification to refer,and we can supply the drawing also.

After-Revenue Services
Our following-product sales services begin instantly following signing the deal.
1.No make a difference FOB or CIF the value expression is we would attempt our greatest to find a most affordable freight cost for customers’ reference.
2.We will send creation approach photographs to customers for their inspection. 
3.Do our greatest to aid client arrange the cargo and customs clearance.
4.Set up, routine maintenance and mend directions with total information.