Fiber Optic Joint Closure Protective Shrink Tube with Heat Reactive Paint

S3PS Heat Shrink Tube for Fiber Optic Dome Closure

S3PS Heat Shrink Tube for Fiber Optic Dome Closure
  Heavy wall cross-linked polyolefin   Operating temperature: -55~110ºC
  Innovative locking mechanism, hermetically sealed   Shrink temperature: 125 ºC
  Spiral polyamide adhesive, mirror like adhesive optional    Shrink ratio: 4:1
  Excellent UV,corrosion,mechanical damage resistance  
  Thermo-chromatic paint changes color for proper installation
Dimensions 4:one
Reference As supplied(mm) After recovered(mm) CZPT length
UPM S3PS ID min. ID max. WT nom. mm
28/six 28 six three. one hundred fifty, 200 
thirty/10 30 10 3. 150, two hundred
40/ten forty 10 150, 200 
sixty five/20 sixty five twenty three.six a hundred and fifty, 200 
75/22 72 22 a hundred and fifty, 200 
eighty five/twenty five 85 twenty five 3.8 150, 200 
thirty/six 30 6 three.five a hundred and fifty, 200 
43/nine 43 nine 3.7 one hundred fifty, 200 
ID=Internal Diameter        WT=wall thickness

House Test method           Values          
Density ASTM D2671 .95~one.00
Hardness (Shore D) ASTM D2671 ≥ 45 HD
Tensile strength ASTM D2671 ≥19 MPa
Breakdown elongation ASTM D2671 ≥450%
Aging                 Tensile strength ASTM D2671 ≥18 MPa
158 ºC/168hrs Breakdown elongation ASTM D2671 ≥400%
Dielectric strength ASTM D2671             ≥15 KV/mm
Fungus resistance ASTM G21 No incidence of fungal growth
UV resistance ASTM G53 After 2000hrs elongation 360% min.
Water absorption ASTM D570 23ºC/24hrs  0.two% max.
Low temperature flexibility(out layer) ASTM D2671 -40ºC/4hrs No cracking
Low temperature flexibility(adhesive layer) ASTM D2671 -20ºC/4hrs No cracking
Chemical resistance Hydrochloric acid, concentration 23ºC/168hrs
four hundred% min.
Sulphuric acid, concentration
Sodium chloride,concentration
Sodium hydroxide, concentration 0.1
Sodium nitrate, concentration
Sodium sulphate, concentration 0.1
Chemical resistance 5%HCL/five%NaOH/5%NaCl No corrosion No leaking
Internal air pressure 60kPa/24hrs
Sealing  23ºC/100kPa duration 24hrs,or immersed in water for 15mins Move
Temperature cycling 10 temperature cycles from -40ºC to 60ºC,internal air  No leaking
pressure 60kPa, duration 2hrs at each temperature point
Thermal aging 60ºC/168hrs, internal air pressure 70kPa Go
Elongation Pulling with D/45*1500N, internal air pressure 60kPa/24hrs No leaking
Cable torsion Subjecting the cable to 90 degree torsion loading,               No damage, No leaking
maximum torque:50Nm torsion  distance 250mm, 
internal air pressure 60kPa
Chemical attack 70% gasoline and 30%methylbenzene  No leaking
duration 168hrs, after 3 days internal 
air pressure 100kPa
Typical application
      Ideal for aerial and underground applications, expecially in Fiber Optic Dome Splice Closure 
     CZPT color : Black                            
     Special colors (e.g. Clear) are CZPT on request 
     CZPT packaging is 150mm/laptop
     Special sizes and lengths are CZPT on request 
     Please specify specification,coloration,quantity when ordering 

No adhesive at this finish(eight-10 mm) for locking the cable place

Add-ons: Deviation Clip or branch-off clip+ Aluminum foil

Heat Shrinkable Cable Repair Branch off clip 

Heat Shrinkable Cable Repair Branch off clip 
     Casted by aluminum   Operating temperature: -twenty five~90ºC
     Coated by high temperature adhesive   Shrink temperature: 135ºC
      Molded by EVA or PA hot melt   Halogen free
      Four types: small, middle, big and super big   RoHS compliant 


Reference            Code            Sizes Inner Adhesive
UPM    (mm)  
Small   S sixty five*28 EVA or PA 
Medium   M eighty five*40 EVA or PA 
Large  L 104*59 EVA or PA 
Extra Large  XL 127*68 EVA or PA 
Typical application
  Wide used in the heat-shrinkable tubing made the continuation of communication cable branch , 
   can one  divides into two, into three, then achieve a variety of cable perfect branch. 
     CZPT color : Black
     CZPT packaging by pieces
      Please specify specification, CZPT length, quantity when ordering

UPM background
In 2002, UPM was set up in HangCZPT, China to manufacture heat shrink components.
In 2003,UPM commenced selling goods for shipyard and the high voltage switchgear cabinet industry.
In 2005, UPM turned an accredited worldwide supplier to Siemens for Higher Voltage Switchgear .
In 2006, UPM began marketing products to the automotive sector.
In 2007, UPM commenced producing heat shrink connectors, CE authorized.
In 2008, UPM expanded the item line to consist of power cable accessories.
In 2009, UPM started producing goods for the telecommunications business.
In 2571, UPM expanded the manufacturing capability to include a selection of Moulded areas.
In 2011, UPM expanded their manufacturing knowledge to include triple-layer co-extrusion goods.
In 2012, UPM introduced in a lot more automated machineries used in extrusion, co-extrusion, enlargement and splicing procedures.
In 2013, UPM gained UL486D certification for the S3(h ) and S3(nh) item lines.
In 2014, UPM started to offer triple layer tube for cable joint
In 2015, Co-extrusion tube with adhesive tube offered well.
In 2016, Much more products acquired UL 224 approval.
Far more information coming up… Let us shrink the planet together. Let us pick Union Polymer.
Given that its founding, UPM has distinguished alone with outstanding item high quality, thorough CZPT soon after-sales support, and well timed delivery. Sturdy R&D and innovation are the core elements for the sustainable development of UPM. UPM’s production plant is now 3 occasions bigger than the unique facility. The in-home 3MeV Dynamitron (3MeV E-Beam) gear permits UPM to preserve top quality handle in excess of the whole offer chain from formulation, compounding & granulation, extrusion, cross-linked radiation, enlargement, adhesive software, slicing, printing, and packaging. New products are continually currently being added to our solution line to satisfy consumer needs.

Fiber Optic Joint Closure Protective Shrink Tube with Heat Reactive Paint