Cooling system Spare Parts Radiator for Engine

                      Micro channel parallel movement radiator specialist company

The condenser-a part of the air conditioning circuit-is integrated into the engine cooling module, where it is used to awesome down and condense the compressed, gaseous refrigerant from the compressor. We produce brazed, flat tube condensers that provide large efficiency in spite of their compact and lightweight design and style. They make sure fast cooling of the passenger compartment many thanks to the best possible matching of heat transfer and force fall on the two the coolant and the air aspect.

The condenser is a warmth exchanger in a cellular A/C method. Presently, condensers are normally made of aluminum, but in the earlier, some ended up created of copper/brass. Condensers search very considerably like radiators, just a little thinner, and since they also rely on air flowing by way of them, are typically positioned in entrance of the radiator.
Like radiators and evaporators, condensers are also constructed as a sequence of tubes with fins around them. its  job is to launch warmth. A lot more specifically, to release the warmth the refrigerant absorbed even though it was flowing through the evaporator, quite considerably the very same way the radiator releases the warmth from engine coolant that the coolant absorbed whilst it was flowing by way of the motor. The refrigerant enters the condenser as a large-pressure vapor, but as it flows through the condenser and cools, it turns back again into a cooler substantial-force liquid.

Merchandise attributes
1 adopt low height fins and multiple flat pipes to increase the heat dissipation area and improve the heat dissipation performance.
2 fin special treatment to enhance lodging resistance and maintain the tidiness of the products’ appearance 
3 powder coating on the products can enhance corrosion resistance and improve product life cycle.
4 none- argon arc welding solder products look different.
5 every product’s pressure is maintained by using nitrogen so the product is free from leakage at 100% before it leaves the factory

Business Benefit
one. Generic products are supposed to be manufactured strictly according to the installation standard of the original factory, in this way to ensure the accurate installation for the users.
two. This special design for the pin not only enhances its lodging resistance,ensure the visual appearance tidy but also reduces the air blockage chance, it also allows more heat dissipation area to improve heat transfer performance. In that way, the air conditioning system can achieve its expected function more efficiently.
3. Part of the products uses galvanised microchannel flat tube as material or adopt the powder coating treatment, in order to improve products’ corrosion resistance and prolong the service life.
4. By machining core into different thickness and wave distance and changing the amount of holes in flat tube,we can improve the heat dissipation efficiency of condenser of the product, lower down the system compression power, save fuel and improve economic efficiency.
5.CZPTy product is double checked and a pressure-holding device is installed to ensure that every product is 100% leak-free before it leaves the factory.
6. The company with a complete production chain, is focused on the developing new products, and keeping tracking of products to ensure the timeliness of all product supply, and also enhance the flexibility of enterprise operation.
7.Only when we have an independent team with high efficiency can we satisfy CZPT demands.  

Extended time period organization is based on our dependable solutions, quickly react and our professional expertise to Auto AC. We are going to turn out to be your associate, not just your provider.
one.CAD Drawing, and mould design foundation on your sample
2.Mould check and sample verification ahead of mass creation.
3.CZPTers of different delivery traces.
4.competitive freight delivers and one-cease provider on clearing, shipping and delivery problems.

Q1. Are you a manufacturing unit or trading business? A: we are a self -personal manufacturing unit, we provide a single-cease provider for our buyers, from spare elements to condenser, from technological product sales to shipping and delivery and to after-sales, so as to save the expense for client, control the high quality and direct time, offer the ideal companies
Q2: The place is your manufacturing facility positioned? How can I visit there? A: Our manufacturing unit is located in  HangCZPT, Shan dong, China.
The closest airport is ZheJiang Yaoqiang airport or HangCZPT Liuting airport.
Q3. What is the manufacturing time for new molds and mass manufacturing? A: 7-ten times to develop the new moulds, mass production normally takes about twenty-25days for 1 20gp,25-30days for 1 40hq, can procedure urgently if need.
This autumn: What is the payment phrases? A: Telegraphic Transfer (T/T) and Letter of Credit score (L/C).
Q5: Can you ship me samples? A: Yes, Samples are for free of charge, and freight is on your side.


Cooling system Spare Parts Radiator for Engine